Card Guide - Compaq Evo W8000 Maintenance And Service Manual

4.24 Card Guide

1. Prepare the workstation for disassembly (Section 4.2), then place it on its side.
2. Remove the access panel (Section 4.5).
3. Remove the memory expansion board (Section 4.9.2).
4. Remove any expansion cards from the card guide (Section 4.15.1).
5. Remove the main air baffle (Section 4.16.1).
6. Remove the front fan (Section 4.22).
7. Remove the remaining screw attaching the card guide bracket to the air plenum.
8. Remove the four screws securing the card guide to the card guide bracket.
9. Remove the card guide from the bracket.
To replace the card guide, reverse the above procedure.
Maintenance & Service Guide
Removal & Replacement Procedures
4–43