Table of Contents
Advertisement
If you hear a chime sound when you connect the power plug, it means that the power is connected properly.
• The device turns on with a chime sound, and starts operation
in Smart mode.
– Immediately after the device starts operation, a welcome
message, app linkage reminder and 'sensor ready' indicator are
–
• During operation of the device, the front panel is kept open about
after the power plug is connected.
• The front display brightness changes depending on the ambient
light intensity.
Change the device operation mode as necessary.
• Press the [
] button to select the operation mode to use.
– Each time you press the button, the mode changes in the following
• If you switch the device to Sleep mode, the front panel closes, the
indicator only illuminates.
– If you change the operation mode after using Sleep mode for
ready' indicator appears.
• In Smart mode, the fan speed is automatically adjusted
odour conditions to keep the room air clean.
– If the room air becomes clean after device operation in Smart
mode for a certain period of time, the front panel closes and the
device automatically switches to 'power saving mode'.
decreases. The mode can manually be turned off by changing the
fan speed.
– While in Smart mode, use the SmartThings app to activate Sleep
mode. When it becomes very dark around the device, the front
panel will automatically close itself, the front display will turn off
and the device will operate at the lowest fan speed.
15
English
Advertisement
Table of Contents
