Contents Product Introduction Safety Tips Attentions Parts name Parts function Preparation before use Remote Control Operation Master Operation Disassembly method Cleanning and maintenance Maintenance instructions Thoubleshooting Specifications Warranty Correct Disposal of this product Do not dispose of this product with unsorted munici- pal waste.
Product Introduction Through five purifi cation functions of anti-bacterial and anti-fungus filter, catalytic decomposition of the cold catalyst, HEPA high efficient filter, activated carbon adsorption technology, it can effectively remove airborne bacteria, dust, harmful gases etc. • Silver ions anti-bacterial and anti-fungus Inhibit various types of bacteria.
Safety Tips Safety Tips Use only single-phase AC power. Otherwise, it may cause fire, electric shock or other accidents. Do not use when the power cord and plug are damaged, or plug is too loose when inserted. Otherwi se, it may cause electric shock, short circuit, fire or other accidents. Do not bump, damage, excessive bend, stretch, twist, tie, press, or squeeze the power cord.
Attentions Note in use Please put in a stable place with smooth air circulation. If you want to remove the dust in the room, it will be more effective when the machine is located in a lower place. Do not put the machine outdoors or in a place with direct sunlight. Otherwise, the machine will fade, and the receiver sensitivity of the remote control will decline.
Parts name Host computer parts Host parts 1 Host computer parts Remote control Filter screen (Activated carbon) Net rack Host display screen Button Activated carbon net rack body Filter Components (Cotton filter, HEPA filter components) Air inlet Dust Frame Filter Panel 2 Host display Indicator light...
Parts function 1 Back The remote control placing tank Handle Air outlet Plasma and negative Power Cord ion generator Functional description of various parts and components 1• Panel You need open the internal filter to clean, and the machine starts after you close it. 2•...
Page 8
Parts function 6• Dust sensor It can sense the cigarette smoke, pollen, dust and other particulate matter, and detect the air pollution level. 7• Button On/off button and mode button respectively control the switch and operating mode of the machine. 8•...
Preparation before usage Air purifier preparation Remove the packaging bags before use and then connect to the power to start the machine. Press (Please refer to the picture in opera- tion.) 1. Open and remove the panel 2. Remove the dust collection frame 3.
Remote Control Operation Remote Control Operation Use the remote control to program the air purifier to your preferred level. Timer Timer button If it in power state, every time you Lock press the button, the timing will Auto Speed change according to the following sequence.
Master Operation Master operation After it is power on, all the lights on the host would all flash, and then went out. At this time the machine is in standby mode. Note: the machine has a function of memorizing unexpected power-down. If the machine is unexpected power down when it is in operation, it will auto- matically return to the state before accidental power failure when the power is on again.
Cleanig and maintenance Cleaning and maintenance ※ If it needs dismantling in maintenance, please do it in the following If it needs dismantling in maintenance, please do it in the following sequence of instructions. sequence of instructions. 1. Turn off the machine and unplug the power cord 2.
Page 13
Wash and maintenance Wash and maintenance ※ In order to maintain the best state, machines should be cleaned regular- ly.,During the clean process, machines should be unplug, not in wet hands which may cause electric shock and injuries. 1. Machine Body Cleaning Dirt on the main body of the machine should be clean as often as possible.
Maintenance instructions The maintenance of cotton filter, HEPA filter components and activated carbon filter 1. The replacement period of cotton filter varies depending of operating time and location. Depending on the environment, sometimes you can use more than 1 year, but sometimes it may also becomes deterioration in a few months.
Page 15
Maintenance instructions If it is not in use for a long term 1. Please switch off, unplug the power plug, and tie up power cord. 2. Clean each filter part, air inlet, outlet and the host body. 3. Place the carbon filter in a suitable plastic bag, seal it, and put it in the machine.
Troubleshooting Please reaffirm the problems before asking for maintenance. Symptoms Check Processing method Whether the battery is dead? Replace with new battery Are the positive and negative Install the battery correctly The remote control poles installed reversely? does not work Does indoor fluorescent light Keep the machine in a keep flickering for the reason...
Net weight (kg) * The applicable area is the impact area when the machine is running at high speed. GREE products are subject to continuous improvements. GREE reserves the right to modify product design, specifications and informations without notice and without incurring any obligations.
Canada. During the warranty period, if this AIR PURIFIER fails under normal use, GREE will, at its option, either repair the unit or replace it, free of charge, within a reasonable period of time after the AIR PURIFIER is returned.
Need help?
Do you have a question about the GCF280CANA and is the answer not in the manual?
Questions and answers