Table of Contents
Advertisement
3–2 Getting Started Guide
Throughout the setup process, follow these hints:
I
Always use the left mouse button during the selection process.
I
Do NOT install a printer, printer drivers, or any other type of
drivers until AFTER the initial setup process is complete.
Attempts to do so will disrupt the setup process.
I
Prior to or during the setup process, do not attempt to install
additional software or to attach any external devices or drives
(such as printers and ZIP drives, or printer drivers on CD).
I
If you get a Printer Install screen, select Cancel.
I
Once the setup process begins, do not interrupt the process, turn
the power off, or bump or unplug the power cord. If the process is
abruptly stopped or interrupted, you may have to install the
system using the Quick Restore CD, which will take longer.
I
If the screen goes blank or nothing appears to be happening, look
at the drive activity light or the screen for an hourglass. If lights
are blinking or you see an hourglass, the setup process is
continuing. If the computer locks up for more than one hour and
will not continue the setup process, restart the computer to
continue setup. Turn the computer off by pressing the Power
button. Do not use Ctrl+Alt+Del to turn off your computer.
Advertisement
Table of Contents
