Henden H2 User Manual
  1. Manuals
  2. Brands
  3. Henden Manuals
  4. Swimming Pool Vacuum
  5. H2
  6. User manual

Henden H2 User Manual

Robotic pool cleaner
Hide thumbs Also See for H2:
Table of Contents

Advertisement

Quick Links

Download this manual
H2 Robotic Pool Cleaner
USER MANUAL
CAUTIONS AND WARNINGS:
Use the originally supplied power supply only.
Do not use an extension cable in any
case whatsoever.
Ensure the electrical outlet is protected by
a ground fault interrupter (GFI) or an earth
leakage interrupter.
www.hendenpools.com.au/productregistration
Keep the power supply out of standing water.
Do not enter the pool while the Robotic Pool Cleaner
is working.
Unplug the power supply before servicing.
Do not pull the Robotic Pool Cleaner from the pool
using the cable.
Register your product online:
IMPORTANT
Please read carefully

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H2 and is the answer not in the manual?

Questions and answers

Related Manuals for Henden H2

Summary of Contents for Henden H2

  • Page 1 H2 Robotic Pool Cleaner USER MANUAL IMPORTANT Please read carefully CAUTIONS AND WARNINGS: Keep the power supply out of standing water. Use the originally supplied power supply only. Do not enter the pool while the Robotic Pool Cleaner Do not use an extension cable in any is working.

  • Page 2: Table Of Contents

    Contents H2 Robotic Pool Cleaner Introduction Helpful hints Specifications H2 product parts H2 operation Setup Putting the H2 into the pool Removing the H2 from the pool Maintenance Cleaning after use Periodic cleaning Cleaning the impeller Off-season storage Troubleshooting HENDEN – USER MANUAL...

  • Page 3: Introduction

    > Motor protection: IP 68 Minimum depth: 0.80m/2.6ft Designed for easy use and maintenance, Maximum depth: 5m/16.4ft the Henden H2 is a quality piece of pool equipment guaranteed to last. > Digital Power supply Input: 100-125 AC Volts/ 200-230 AC Volts...

  • Page 4: H2 Operation

    H2 Robotic Pool Cleaner H2 OPERATION Setup Before using the Henden H2 Robotic Pool Cleaner for the first time, perform the following steps: Position the power supply at least Attach the floating cable from the H2 3.5m/12ft from the edge of the pool.

  • Page 5: Putting The H2 Into The Pool

    Press the OFF button on the power supply and unplug from the power point. obstructions. UNPLUG Turn the power supply ON. The H2 Do not pull the pool cleaner from the pool using the cable. Robotic Pool Cleaner will now operate until it has reached the end of the cleaning cycle.

  • Page 6: Maintenance

    H2 Robotic Pool Cleaner MAINTENANCE Lift up the basket. Cleaning after use It is highly recommended to clean the filter basket after each cleaning cycle. Note: Do not let the filter panels dry out before cleaning. Make sure the power supply is switched off and unplugged.

  • Page 7: Periodic Cleaning

    > Unplug the H2 Robotic Pool Cleaner from the external power source. > Make sure that no water is left in the H2 Robotic Pool Cleaner. If water appears in the unit, place upside down for 24 hours then return and continue the storage process.
  • Page 8 H2 Robotic Pool Cleaner TROUBLESHOOTING If the corrective actions supplied do not solve the problem, please visit your local Reece Irrigation & Pools branch or call 1300 Henden. SYMPTOM POSSIBLE REASON CORRECTIVE ACTION SYMPTOM POSSIBLE REASON CORRECTIVE ACTION The power-supply or...
  • Page 9 Register your product online: www.hendenpools.com.au/productregistration...

Table of Contents