Table of Contents
Advertisement
Quick Links
H3 Robotic Pool Cleaner
USER MANUAL
CAUTIONS AND WARNINGS:
Use the originally supplied power supply only.
Do not use an extension cable in any
case whatsoever.
Ensure the electrical outlet is protected by
a ground fault interrupter (GFI) or an earth
leakage interrupter.
www.hendenpools.com.au/productregistration
Keep the power supply out of standing water.
Do not enter the pool while the Robotic Pool Cleaner
is working.
Unplug the power supply before servicing.
Do not pull the Robotic Pool Cleaner from the pool
using the cable.
Register your product online:
IMPORTANT
Please read carefully
Advertisement
Table of Contents
Related Manuals for Henden H3
Summary of Contents for Henden H3
- Page 1 H3 Robotic Pool Cleaner USER MANUAL IMPORTANT Please read carefully CAUTIONS AND WARNINGS: Keep the power supply out of standing water. Use the originally supplied power supply only. Do not enter the pool while the Robotic Pool Cleaner Do not use an extension cable in any is working.
-
Page 2: Table Of Contents
Contents H3 Robotic Pool Cleaner Introduction Helpful hints Specifications H3 product parts H3 operation Setup Putting the H3 into the pool Weekly timer Removing the H3 from the pool Maintenance Cleaning after use Periodic cleaning Cleaning the impeller Off-season storage Troubleshooting HENDEN –... -
Page 3: Introduction
> Digital Power Supply: Input: 220–240 AC Volts; 50-60 Hertz; 120 Watt; Output: <30 Designed for easy use and maintenance, VDC; IP 54. the Henden H3 is a quality piece of pool equipment guaranteed to last. > Motor protection: IP 68 Minimum depth: 0.80m/2.6ft Maximum depth: 5m/16.4ft... -
Page 4: H3 Operation
H3 Robotic Pool Cleaner H3 OPERATION Setup Before using the Henden H3 Robotic Pool Cleaner for the first time, perform the following steps: Position the power supply at least Attach the floating cable from the H3 3.5m/12ft from the edge of the pool. -
Page 5: Putting The H3 Into The Pool
Make sure One click – The H3 will automatically work every day for a full cycle, that the floating cable is free of any that is, once a day for 7 days. -
Page 6: Removing The H3 From The Pool
Do not pull the pool cleaner from the pool using the cable. Press the OFF button on the power supply and unplug from Using the floating cable, bring the H3 Robotic Pool Cleaner to the pool’s edge. the power point. -
Page 7: Maintenance
H3 Robotic Pool Cleaner MAINTENANCE Lift up the basket. Cleaning after use It is highly recommended to clean the filter basket after each cleaning cycle. Note: Do not let the filter panels dry out before cleaning. Make sure the power supply is switched off and unplugged. -
Page 8: Periodic Cleaning
MAINTENANCE Periodic cleaning To ensure longevity of your H3 Robotic Pool Cleaner, we recommend completing a deep clean once a month. A deep clean consists of dismantling the 4 ultra-fine filter panels on the basket, according to the following steps: Position your thumbs on the panel Reassemble the 4 filter panels. -
Page 9: Cleaning The Impeller
> Unplug the H3 Robotic Pool Cleaner from the external power source. > Make sure that no water is left in the H3 Robotic Pool Cleaner. If water appears in the unit, place upside down for 24 hours then return and continue the storage process. - Page 10 H3 Robotic Pool Cleaner TROUBLESHOOTING If the corrective actions supplied do not solve the problem, please visit your local Reece Irrigation & Pools branch or call 1300 Henden. SYMPTOM POSSIBLE REASON CORRECTIVE ACTION SYMPTOM POSSIBLE REASON CORRECTIVE ACTION The power-supply or...
- Page 11 Register your product online: www.hendenpools.com.au/productregistration...
Need help?
Do you have a question about the H3 and is the answer not in the manual?
Questions and answers
How to adjust the cleaning time