Related Manuals for Omron JUNMA Series
Summary of Contents for Omron JUNMA Series
- Page 1 OMRON YASKAWA Motion Control B.V. Document No. 900-019-243-01-OY JUNMA SERIES SERVO DRIVE JUSP-JC001 Communication Board for SJDE-**APA-OY User Manual...
- Page 2 © Copyright 2007 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed with respect to the use of the information contained herein.
- Page 3 Introduction This document describes the details of the additional functions for the JUNMA series AC SERVOPACKs. Related Manuals Refer to the following manuals as required. Manual Name Manual Number JUNMA series User Manual TOEP-C71080601-01OY JUNMA series AC SERVOMOTOR INSTRUCTIONS TOEP-C23026101OY...
-
Page 4: Table Of Contents
1 PRODUCT DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3 1.1 Basic product specification. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 1.2 Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 2 PRODUCT SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 2.1 Environment - Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4... -
Page 6: Product Description
1.1 Basic product specification. 1 Product Description JUSP-JC001 is an interface unit for the SJDE-**APA-OY to communicate with the digital operator or with a personal computer using JunmaWin+ software. 1.1 Basic product specification. Basic product specification is as follows.r Items Specification Communication Unit for SJDE-**APA-OY to communicate with digital operator or with Title... -
Page 7: Product Specifications
2.1 Environment - Installation 2 Product Specifications 2.1 Environment - Installation Specification of environment and installation is as follows: Items Specification 0 ~ + 50 ° C Ambient temperature -20 ~ + 50 °C Storage temperature Altitude Less then 1000m Humidity Less then 90% (not condensing) 2.2 Dimension... -
Page 8: Layout And Dimensions Of The Jusp-Jc001 Connection Cable
2.2 Dimension Fig2. Dimension of Unit 2.2.2 Layout and Dimensions of the JUSP-JC001 connection cable. See figure 3 below. -
Page 9: Specification Of The Connectors
3.1 CN3 Communication connector for the Digital Operator 3 Specification of the connectors 3.1 CN3 Communication connector for the Digital Operator 3.1.1 Connector specification Maker HONDA Board Side Model Number HDR-EC14LFDTN-SLE-PLUS(14P) Maker Honda Cable Side Model Number (Connector) HDR-E14MAG1+(14P) Model Number (Connector Case) HDR-E14LPA5 3.1.2 Connector Pin Arrangement. -
Page 10: Connector Pin Arrangement
3.3 CN52 Connector for SJDE-**APA-OY 3.2.2 Connector Pin Arrangement Symbol Function Number /TXD Transmitting /RXD Receiving /RXD 3.3 CN52 Connector for SJDE-**APA-OY 3.3.1 Connector specification Maker Board Side Model Number S8B-ZR-SM4A-TF(LF)(SN) Maker Cable Side Model Number (Connector) ZHR-8 Model Number (Connector Case) 3.3.2 Connector pin arrangement Symbol Function... -
Page 11: Block Diagram
3.3 CN52 Connector for SJDE-**APA-OY 4 Block Diagram The block diagram is shown in the figure below. CN52 TXD0 RXD0 /TXD RS232C /RXD TXD, /TXD RS422 RXD, /RXD Fig 4. Block Diagram of JUSP-JC001. -
Page 12: Restrictions For Use
5.1 Limits for connecting and disconnecting the SJDE-**APA-OY 5 Restrictions for Use. Some restrictions for the use of the JUSP-JC001 commnunication board are described below. The communication board should always be used within these specifications. 5.1 Limits for connecting and disconnecting the SJDE-**APA-OY The connnector on the SJDE-**APA-OY servopack is not specified to be frequently connected and disconnected to the communication cable. -
Page 13: Repair
5.6 Repair 5.6 Repair Product repair is not planned, if the product is defective, please exchange the product 5.7 Related Documents Supplement for additional functions for SJDE-**APA-OY and SJDE-**ANA-OY Document number:900-019-242-OY... - Page 14 OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.omron-industrial.com Austria Netherlands France Spain Tel: +43 (0) 1 80 19 00 Tel: +33 (0) 1 56 63 70 00...
Need help?
Do you have a question about the JUNMA Series and is the answer not in the manual?
Questions and answers