Installing Ddr-Sdram Dimms - HP d325 MT Hardware Reference Manual

Hardware Upgrades
Installing DDR-SDRAM
CAUTION: The memory module sockets have gold metal contacts. When upgrading
the memory, it is important to use memory modules with gold metal contacts to
prevent corrosion and/or oxidation resulting from having incompatible metals in
contact with each other.
CAUTION: Static electricity can damage the electronic components of the computer
or optional cards. Before beginning these procedures, ensure that you are
discharged of static electricity by briefly touching a grounded metal object. Refer to
Appendix E "Electrostatic Discharge" for more information.
CAUTION: When handling a memory module, be careful not to touch any of the
contacts. Doing so may damage the module.
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
2. Shut down the operating system properly, then power off the computer and any
external devices.
Disconnect the power cord from the power outlet.
3.
4. Remove the computer access panel and located the memory module sockets.
bezel.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching.
2-8
DIMMs
Hardware Reference Guide