Installing Ddr-Sdram Dimms - HP PV738AA Hardware Reference Manual

Hardware Upgrades

Installing DDR-SDRAM DIMMs

Ä
Ä
Ä
Å
2–8
CAUTION: The memory module sockets have gold metal contacts.
When upgrading the memory, it is important to use memory modules with
gold metal contacts to prevent corrosion and/or oxidation resulting from
having incompatible metals in contact with each other.
CAUTION: Static electricity can damage the electronic components of
the computer or optional cards. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object. For more information, refer to
"Electrostatic Discharge".
CAUTION: When handling a memory module, be careful not to touch
any of the contacts. Doing so may damage the module.
1. Turn off the computer properly through the operating system and
turn off any external devices.
2. Disconnect the power cord from the power outlet and disconnect
any external devices.
3. Remove the computer access panel and front bezel. Refer to
"Removing the Computer Access Panel and Front Bezel."
4. Locate the memory module sockets.
WARNING: To reduce risk of personal injury from hot surfaces, allow
the internal system components to cool before touching.
www.hp.com
Appendix D,
Hardware Reference Guide