Table of Contents
Advertisement
▷
Where applicable, the hazard warning
flashers will be switched on.
▷
Where applicable, the PreCrash functions
are triggered.
Safety information
Follow the safety information in the "Forward
Collision Mitigation" chapter.
Sensors
The system is controlled by the radar sensors
on the sides and rear.
Turning rear-end collision
preparation on/off
The system is automatically active when the
vehicle is turned on.
The system is deactivated in the following sit-
uations:
▷
When driving in reverse.
System limits
General information
Follow the system limits in the "Collision warn-
ing systems" chapter.
Functional limitations
The system function may be limited in the fol-
lowing situations:
▷
When a vehicle is approaching at a speed
much faster than your own.
▷
The approaching vehicle is approaching
slowly.
Online Edition for Part no. 01405A546C7 - II/22
Safety
Emergency Stop Assistant
Principle
If the driver is no longer fit to drive, the Emer-
gency Stop Assistant helps to safely bring the
vehicle to a standstill.
General information
The emergency stop function is not triggered
automatically. The emergency stop function
can only be triggered manually by the occu-
pants.
When the system is activated, the vehicle is
brought to a standstill in its own lane by use of
lane guidance.
Depending on the vehicle equipment and na-
tional-market version, the system includes a
lane change function.
With lane change function: on motorways or
motorway-like roads, the system steers the ve-
hicle to the side of the road or shoulder where
possible. On other roads or with high traffic
volume, the vehicle is brought to a standstill on
the actual road.
Overview
Button in the vehicle
Parking brake
CONTROLS
185
Advertisement
Table of Contents
