Table of Contents
Advertisement
CONTROLS
Steering intervention
Depending on the national-market version:
when there is no response to the vibration of
the steering wheel at speeds of up to
130 mph/210 km/h and the lane marking is
crossed, the system engages the active steer-
ing intervention. The steering intervention
helps return the vehicle into the lane. The
steering intervention can be noticed on the
steering wheel and can be manually overrid-
den at any time.
The steering intervention occurs when a mini-
mum speed is reached. The minimum speed is
displayed on the control display.
Flashing of the light
A flashing of the light in exterior mirror during
vehicle unlocking serves as system self-test.
System limits
General information
Follow the system limits in the "Collision warn-
ing systems" chapter.
Upper speed limit
If the vehicle speed exceeds approx.
155 mph/250 km/h, the system is deactivated
temporarily.
If the vehicle speed falls below approx.
155 mph/250 km/h, the system once again re-
sponds according to the setting.
Displaying warnings
Depending on the selected warning settings,
e.g., warning time, more or fewer warnings can
be displayed. However, there may also be an
excess of unwarranted warnings of critical sit-
uations.
Functional limitations
The system may be limited in the following sit-
uations:
182
Safety
Online Edition for Part no. 01405A546C7 - II/22
▷
When a vehicle is approaching at a speed
much faster than your own.
▷
In tight curves or on narrow roads.
▷
The bumper is dirty, iced up or covered,
for instance by stickers.
Depending on the national-market version: the
steering intervention may be limited, for in-
stance in the following situations:
▷
In the event of missing, worn, poorly visible,
merging, diverging, or multiple lane boun-
daries such as in construction areas.
▷
With lane boundaries that are covered in
snow, ice, dirt or water.
▷
With lane boundaries that are not white.
▷
With lane boundaries that are covered by
objects.
▷
When driving very close to the vehicle in
front of you.
▷
If the camera is impaired.
▷
Up to 10 seconds after drive readiness is
switched on via the Start/Stop button.
A Check Control message may be displayed
when the system is limited. Depending on the
national-market version, a yellow icon is also
illuminated.
Side collision mitigation
Principle
The side-collision warning helps to avoid im-
minent side collisions.
Advertisement
Table of Contents
