Making A Connection Automatically Reconnect If It Disconnects; Administrator's Guide - HP Compaq t5125 Administrator's Manual

✎
✎

Administrator's Guide

5. Click the Save button to save your changes.
NOTE: Only primary connections can be set to automatically
connect when HP Connection Administrator is launched.
Making a Connection Automatically
Reconnect if it Disconnects
In the Advanced window, primary connections assigned to users can
be set to automatically reconnect in the event that the connection
disconnects.
1. In the HP Connection Administrator window, click the
Advanced
button to access the Advanced window.
2. On the Assign Connections tab of the Advanced window, select
the appropriate user from the
3. Select the connection in the user's connection list that you want to
make automatically reconnect.
4. In the Persistent column, click the check box to make the
connection automatically reconnect. An unchecked box means do
not automatically reconnect.
Save
5. Click the button to save your changes.
NOTE: Only primary connections can be set to automatically
reconnect.
www.hp.com
HP Connection Administrator
User
drop-down list.
2-21