Making A Connection Automatically Connect When Hp Connection Administrator Is; Launched - HP Compaq t5125 Administrator's Manual

HP Connection Administrator
✎
2-20
4. In the Primary column, if the entry for the selected connection is
unchecked, click the check box to enable it.
5. To assign a secondary connection to the primary connection,
select the connection that you want to be secondary and uncheck
it. The connection becomes a secondary connection to the first
primary connection directly above the secondary connection in
the list.
6. To arrange the connections in the order that you want them to
connect, select a connection and click the
up in the list or the
Remember that secondary connections are always associated with
the first primary connection above them in the list.
Save
7. Click the button to save your changes.
NOTE: Since each secondary connection must have an associated
primary connection listed above the secondary connection, the
connection at the very top of the list of connections must be a primary
connection.
Making a Connection Automatically
Connect when HP Connection
Administrator is Launched
In the Advanced window, primary connections assigned to users can
be set to automatically connect when HP Connection Administrator
starts up.
1. In the HP Connection Administrator window, click the
Advanced
button to access the Advanced Configuration
window.
2. On the Assign Connections tab of the Advanced window, select
the appropriate user from the
3. Select the primary connection in the user's connection list that
you want to automatically connect.
4. In the Auto column, click the check box to make the connection
automatically connect. An unchecked box means do not
automatically connect.
www.hp.com
Down
button to move it down in the list.
User
drop-down list.
Up
button to move it
Administrator's Guide