HP Compaq t1010 Overview page 6

7. (Optional) If you want to enable encryption:
a. Select the Encryption tab and select the Enable encryption
check box.
b. Enter the encryption key information for Key 1, Key 2, Key 3,
and Key 4.
c. Select the appropriate value for the Encrypt data transmission
using field. The default value is "Key 1."
d. Click OK.
8. Select the Network tab.
a. Select the Specify an IP address check box but leave all of the
fields blank.
b. Click Apply, then Close.
✎
The system will prompt you to restart. DO NOT restart the
system when prompted.
9. From the Compaq Connection Manager program, select Shutdown
from the Connections tab and power off the Thin Client.
10. Insert the Compaq WL110 PCMCIA card into the PCMCIA slot on
the Thin Client.
11. Unplug the Ethernet cable from the Thin Client.
12. Power on the Thin Client. The wireless card is now set up to function
properly.
6