Table of Contents
Advertisement
Safety precautions
CAUTION
The appliance should be installed in a place where the power cord of the product can
be easily pulled out.
• Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
• Failure to do so may result in abnormal vibrations, noise, or problems with the
product.
When installing the product, make sure that no heavy objects are on the power cord
(or cable).
• Failure to do so may result in electric shock or fire.
FOR POWER SUPPLY
WARNING
Remove all foreign substances such as dust or water from the power plug terminals
and contact points using a dry cloth on a regular basis.
• Failure to do so may result in electric shock or fire.
When plugging in the appliance, the power plug should face downward.
• If the power plug faces in the opposite direction, the electric wires within the cable
may be damaged and this may result in electric shock or fire.
When the product, power plug or power cord is damaged, contact your nearest
service center.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
These instructions shall also be available in an alternative format, e.g. on a website.
4
ENGLISH
When installing the appliance, allow
enough space around the appliance.
• Space between both sides of the product
and the wall: At least 60 cm or more,
Space in front of the product: 25 cm or
more
• If enough space for air intake is not
provided, purifying capacity may
deteriorate.
• Make sure obstacles such as a curtain
do not block air inlet or outlet of the
appliance.
Advertisement
Table of Contents
