Table of Contents
Advertisement
Problem
The
• Check the sensors for any foreign substances and clean them if
Comprehensive
Air-quality
• In winter season if you operate the product immediately after
indicator is fixed
on red.
Something is
• If you cook or if outside air gets indoor and affects changes in
wrong with the
Comprehensive
Air-quality
indicator
• Disconnect the power plug and connect it back on after a minute
• If you have followed all the solution indicated in this section and
Fan speed is
not changing
• Set the fan speed to Auto. When the fan speed is set to High, Low,
according to the
Comprehensive
Air-quality.
necessary.
product was delivered, dew may form on the sensor due to
temperature difference (between outdoor and indoor). In this
case, your product may temporarily display 999 ㎍/m
particulate matter (PM10) level/ultrafine particulate matter
(PM2.5) level indicator and also Comprehensive Air-quality
indicator may turned red. In this case, indicator will become
normal after 1~2 hours of operation.
odor, gas sensor may detect odor and the Comprehensive Air-
quality indicator may become red. Ventilate the room for
1~2 hours.
and operate the product. (Reset the sensors)
the Comprehensive Air-quality indicator is still red, there might be
a problem with sensor or wires. Please contact the service center.
or Sleep, the fan speed will not change automatically.
Solution
on the
3
25
ENGLISH
Advertisement
Table of Contents
