Table of Contents
Advertisement
20
CUSTOMIZING SETTINGS
Activating the Main Menu
1
Press the Menu (
) button.
2
Use the
, , ,
buttons to adjust the options.
3
Press the Menu (
) button to exit the OSD menu.
Button
Menu (
)
If the menu is inactive
If the menu is active
If the menu is inactive
If the menu is active
If the menu is inactive
If the menu is active
INPUT
Sets input mode. You can operate the change of input sig nals.
• When two input signals over are connected and press input key, input signal(DVI/HDMI/DP)will be changed
sequentially.
• When only one signal is connected, it is automatically detected. The default setting is DVI.
Powers on or off.
(Power Button)
Power Indicator
Customizing settings
Menu > Quick Settings
Brightness
Contrast
Ratio
SMART ENERGY
SAVING
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
NOTE
The ratio is disabled in the interlaced signal.
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y
vendor. If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower
depend on source.
Activates the main menu.
Exits the OSD menu when the button is pressed.
Adjusts the volume level of the monitor.
Left directional key.
Adjusts the volume level of the monitor.
Right directional key.
When the monitor is in operating mode, the power indicator will turn white (on mode).
Adjusts the color contrast and brightness of the screen.
Adjusts the screen ratio.
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
High
Enables SMART ENERGY SAVING you can save energy with this energy-
high efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy-
low efficient function.
Off
Disables SMART ENERGY SAVING .
Monitor buttons
Description
Description
Picture Mode
Advertisement
Table of Contents
