Ir Pass-Through Connection; Wire-Connecting To Network - Philips Q Line 75BDL3550Q/94 User Manual

75BDL3550Q_86BDL3550Q
3.5.

IR Pass-through Connection

3.6.

Wire-connecting to Network

PC
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [ ] HOME button on the remote control, then select
Connect to network
4. Select
5. Wait until this display finds the network connection.
6. If the "End User License Agreement" window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
NORMAL ID
SOURCE FORMAT
LIST INFO
ADJUST OPTIONS
VOL
ID SET ENTER
Remote Control
INTERNET
ROUTER
[RJ-45]
, then press [ ] button.
[IR OUT]
(DVD / VCR / VCD)
[RJ-45]
Setup
.
14
DVD / VCR / VCD
[IR IN]