Mounting On A Wall; Vesa Grid - Philips Q Line 75BDL3550Q/94 User Manual

75BDL3550Q_86BDL3550Q
1.4.

Mounting on a Wall

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you
use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America.
75BDL3550Q

VESA Grid

Table
1. Spread a protective sheet which was wrapped around the display when it was packed on a flat surface. Lay the display face-
down on the protective sheet to facilitate your operation without scratching the screen.
2. Ensure that you have all accessories necessary for any type of mounting (wall-mounting, ceiling mounting etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in
damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper
installation.
4. For the wall-mounting kit, use M8 mounting screws (with a length 15 mm longer than the thickness of the mounting bracket)
and tighten them securely.
1.4.1. VESA Grid
75BDL3550Q
86BDL3550Q
Protective Sheet
600(H) x 400(V) mm
600(H) x 400(V) mm
2
86BDL3550Q
VESA Grid
Table
Protective Sheet