Table of Contents
Advertisement
AW_DD638_manual_G02_180504.pdf 15 18/5/14 14:48
Notes:
1. Kit parameters include voice and effect parameters for each trigger.
2. After editing, if you do not save it, the edited data will be lost when
you select a different drum kit or turn off the module.
3. After editing, if you do not save the edited kit parameters but directly
enter record mode, it will use the default kit settings for recording.
4. As long as you do not switch to a different drum kit, the currently
edited voice settings will not be lost even when you select a different
menu.
Click is a major function of digital drum. It helps you play in a steady
C
tempo.
M
Turn the click on/off
Y
1.
Press the [CLICK] button to enter CLICK menu and start playing the
CM
click. The button LED will blink in sync with the click sound.
MY
CY
2.
Press the [CLICK] button again to exit CLICK menu and stop the
CMY
click sound. The button LED turns off.
Note:
K
In CLICK menu, if you press [EXIT], it will exit CLICK menu, but will not
stop the click sound.
Editing Click Parameters
In CLICK menu, press the [∧]/[∨] buttons to select a parameter, then
use the data dial or [<]/[>] buttons to change the setting.
Click parameters and their range:
Parameter
Tempo
Voice
T-Sign
Interval
Out
Range
Description
30 ~280
Click tempo
Click, Clave, Stick, CoClick,
Click voice
FmClick, Voice1, Voice2
0/2~9/2, 0/4~9/4, 0/8~9/8,
Click time signature
0/16~9/16
1/2, 3/8, 1/4, 1/8, 1/12, 1/16
Click interval
Phone, Main+Phone
To output the click sound from
just the Phones jack or from the
Phones and Output jacks.
Drum Kit
Click
CLICK
EXIT
15
Advertisement
Table of Contents
