Table of Contents
Advertisement
LAN Driver Installation for Windows
Appendix C. LAN Driver Installation for Windows
After you've installed VIA 4 in 1 drivers, you will need to install the LAN drivers. Step by step
instructions on how to do this are found in the following section.
Details of the Windows
problems with Windows
2000 user's manual or other databases provided by Microsoft
Insert the AT7 series CD into your CD-ROM drive, and it should execute the program automatically. If
not, you can go to the CD location and execute the execution file at the main directory of the CD. After it
has been executed you will see the screen below. There are two ways to install LAN driver. One is to
install by the driver installation program. The other way is to install manually.
Install from driver installation program.
When you insert K7 series CD into your CD-ROM drive, the driver installation program will be excuted
automatically. You should see the screen below
Step 1: Move the cursor to "LAN Driver" and
click on it. You will go to the next screen.
Step 2: You can see that the cursor will be
looked like
for a while. (That means driver
installation is excuting background.)
®
2000
2000
®
2000 operating system will not be mentioned in this manual. If you have any
®
2000 installation, operations, or settings, please refer to your Windows
Note
®
Corporation.
Step 3: Now, you can then check the "Device
Manager" to see that the devices are properly
installed.
C-1
®
®
User's Manual
Advertisement
Table of Contents
