Table of Contents
Advertisement
35.3. Charger Unit
36. REPLACEMENT PARTS LIST
1. RTL (Retention Time Limited)
Note:
The marking (RTL) indicates that the Retention Time is limited for this item.
After the discontinuation of this assembly in production, the item will continue to
be available for a specific period of time. The retention period of availability is
dependant on the type of assembly, and in accordance with the laws governing part
and product retention. After the end of this period, the assembly will no longer be
available.
2. Important safety notice
Components identified by the
for safety. When replacing any of these components, only use specified
manufacture's parts.
3. The S mark means the part is one of some identical parts. For that reason, it may
be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column shows quality of the
material and a flame resisting grade about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (
All capacitors are in MICRO FARADS (
*Type & Wattage of Resistor
mark indicates special characteristics important
) K=1000
, M=1000k
F)P=
150
F
Advertisement
Table of Contents
