Modification Procedure Of Bridge; Cabinet And Electrical Parts Location - Panasonic KX-TCD540NZM Service Manual

30.3. Modification Procedure of Bridge

1. Add a small amount of solder to the bridged pins.
2. With a hot iron, use a sweeping motion along the flat part of the pin to draw the
solder from between the adjacent pads.

31. CABINET AND ELECTRICAL PARTS LOCATION

(BASE UNIT)
32. CABINET AND ELECTRICAL PARTS LOCATION
(CORDLESS HANDSET)
33. CABINET AND ELECTRICAL PARTS LOCATION
(CHARGER UNIT)
147