Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pentair Hydromatic SKV50
Summary of Contents for Pentair Hydromatic SKV50
- Page 1 Pump Installation and Service Manual SKV50 Submersible Sewage Ejector Pump 6096 1009 NOTE! To the installer: Please make sure you provide this manual to the owner of the pumping equipment or to the responsible party who maintains the system. HYD880 (Rev. 6/15/10)
-
Page 2: General Information
2. Risk of Electrical Shock: 4. Use steel or plastic pipe for all General connecting lines between Connect only to a properly Information pump and sewer outlet. grounded receptacle. Septic tank to be vented in accordance with local NOTE: Some city Thank you for purchasing your plumbing codes. - Page 3 ground pin from electrical cord is plugged into the back 140° F). The SKV50 will plug. of the piggyback receptacle on pump solid materials up to extension cord. the diaphragm switch cord. 2" (spherical) in diameter. 9. For proper automatic operation 10.Use pump partially...
-
Page 4: Pump Servicing
either worn out or damaged continuity test, must Pump seals (7) or seal ring. Remove be replaced. Servicing the 4 screws (6) to remove the volute (9). If the impeller (10) Ground check. Set ohmmeter does not rotate freely, clear the scale pointer to R X 100K Servicing should be performed impeller and cavity walls before... - Page 5 When making the ground test, Connect one meter lead to each 7. Remove the stator. To remove if the needle goes clear to zero of the black terminal leads. the stator, remove the four the motor probably has a wire Meter should read about 1.35 head screws...
- Page 6 15.Replace seal ring. Remove the 19.Reinstall oil pipe plug. Coat Pump old square seal ring from the pipe threads with thread Servicing seal plate and stretch on a new sealant before installing. Plug ring coated with O-ring lube. into housing (3). Do not roll the ring onto 10.Remove rotor and shaft.
-
Page 7: Parts List
SKV50 Parts List 6186 0310 MODEL – SKV50 Ref. No. Description Qty. Part No. 115V Power Cord 10’ 146230101 115V Power Cord 20’ 146230201 230V Power Cord 20’ 146232201 • Hardware Kit (Includes Key Nos. U30–1024REP 2A through 2F and pipe plug) Handle Stator bolt 1/4-20x1-3/4 Hex Head Cap Screw... -
Page 8: Limited Warranty
LIMITED WARRANTY HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture. Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance.
Need help?
Do you have a question about the Hydromatic SKV50 and is the answer not in the manual?
Questions and answers