Table of Contents
Advertisement
Voice Command performance may vary based on environmental
conditions including driving speed, helmet type and ambient noise.
For improved performance of the Voice Command feature, minimize
wind impact on the microphone by using the large microphone
sponge and closing the visor.
4.5 VOICE CONNECT (VOX)
The cardo SHO-1 offers VOX technology for safe and hands-free
operation of some key functions.
You can set VOX to either start an intercom call or activate the
Voice Command.
VOX Activation
Speak any word loudly into the microphone
Answer a call
Speak any word loudly into the microphone
Reject a call
Remain silent for about 15 seconds
See section 3 to adjust settings.
VOX Sensitivity
High: Use this setting if it is difficult to activate VOX
(Default: Medium)
Low: Use this setting if it is too easy to activate VOX
VOX can be set to activate the Voice Command
VOX Operation
(default) or to start an Intercom Call. See section 3
Mode
to adjust settings.
In Standby, press
Enable/Disable
2 seconds
VOX (For Intercom/
Voice Command
• Enable: Blue flash for 2 seconds
only)
• Disable: Red flash for 2 seconds
and
simultaneously for
5. INTERCOM
The cardo SHO-1 allows full duplex intercom communication at a
range of up to 1.6 km / 1 mile (subject to terrain and within line of
sight).
To chat with someone via Intercom, first pair your cardo SHO-1 to
the second unit. Pairing is a one-time process. Once paired, the units
should automatically recognize each other whenever in range.
If you have purchased the cardo SHO-1 DUO, the box contains two
factory-paired units configured to communicate via Channel "A".
Intercom Compatibility
Your cardo SHO-1 is compatible with all Cardo intercom products.
Intercom range with other models is limited to the distance
of the device with the shorter range. For more info please visit
www.cardosystems.com/sho1compatibility.
Intercom communication is possible using one of the three
Intercom modes:
|
cardo SHO-1
7
Advertisement
Table of Contents
