Cardo Systems SHO-01 User Manual page 10

To end a call tap .
If you are already in an Intercom call with "A" or "B", tap
to add a third rider ("A" or "B").
THREE-WAY INTERCOM
Rider 2
Pairing
Rider "1" is paired to Rider "2" and also to Rider "3".
1. Rider 1 pairs to Rider 2 using Channel "A" (see 5.2a).
2. Rider 1 pairs to Rider 3 using Channel "B" (see 5.2a).
IMPORTANT: Conference Mode Considerations
During a 3 or 4-Way Intercom Conference call, riders using both
intercom channels "A" and "B" will not be able to receive phone calls or
GPS instructions as long as the call is in progress..
|
cardo SHO-1
10
Rider 3
Rider 1
FOUR-WAY INTERCOM
twice
Pairing
1. Pair Rider 1 to Passenger 2 using Channel "A" (see 5.2a).
2. Pair Rider 3 to Passenger 4 using Channel "A" (see 5.2a).
3. Pair Passenger 2 to Passenger 4 using Channel "B" (see 5.2a).
In this configuration the two passengers (numbered 2 and 4) are
each using two Bluetooth connections:
Calling
1. Make sure all four units are in Standby.
2. Passenger 2 should double-tap
Wait until audio is heard on both units.
3. Rider 1 should tap
4. Rider 3 should tap
to call Passenger 4.
to call Passenger 2.
to call Passenger 4.