Charging The Battery; Customization And Settings - Cardo Systems SHO-01 User Manual

Voice Command
• Intercom
• On / Off
cardo SHO-1 button layout

2. CHARGING THE BATTERY

Make sure that the battery is fully charged for at least 4 hours
before initial use.
Charging with the wall charger is faster than via a computer USB port.
• BATTERY LED RED – Charging
Battery
In Standby, press
Check
• BLUE = Full • PURPLE = Half
The cardo SHO-1 is waterproof and dustproof. However,
when in use, the USB silicone cover should be kept tightly
closed to prevent moisture from entering the unit.
|
cardo SHO-1
4
Volume Up
Volume Down
Music and Mobile
OR
• RED LED OFF – Charging complete
and for 5 seconds.
• RED = Almost empty

3. CUSTOMIZATION AND SETTINGS

Get the most out of your cardo SHO-1 by changing the settings and
customizing your unit according to your own personal preferences.
There are three ways to change the settings:
• Cardo Community on a PC / Mac*
• Cardo SmartSet App on Android or iOS devices
• Settings Menu on your cardo SHO-1.
Set your Buddy name for 1+8 Intercom
Add friends to your Buddy list
Download the latest firmware upgrade
Set your Hot-Dial number
Set the 6 FM radio presets
Change the Voice Recognition language
Disable Spoken Status Announcements
Change A2DP / Intercom audio priority
Change AGC sensitivity for the speakers
Change VOX Operation Mode
Change VOX sensitivity for the microphone
Disable Click-to-Link
Cardo SmartSet Settings
Community App Menu
  
  
  
  
  
  
  
  
  
  
  
  