Table of Contents
Advertisement
7. Once the feet are properly adjusted, tighten the anti-tip feet firmly against the floor.
The dishwasher can also be installed in a recess without its worktop. See Remove dishwasher worktop.
Attach the plinth
(Packed inside the dishwasher.)
Drainage connection
This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height).
This means that the dishwasher can be placed so that the drainage hose runs to a lower level than
the bottom of the dishwasher, such as by routing it directly to a floor drain. The dishwasher is fitted
with an integrated anti-siphon device to prevent the machine from being emptied of water during the
wash cycle.
min.
14 mm
Max. 950 mm
The drainage hose can also be connected to a connection nipple on the sink unit's water trap. The
connection nipple must have an internal diameter of at least 14 mm.
33
Advertisement
Table of Contents
