Table of Contents
Advertisement
3.4 Momentary Switch (UP/Down Switch)
Position
Functional Select (NS)
No.
0
Normal
1
Gain Adjustment
2
Reference Adjustment
3
Factory Page
4
User Page 1
5
User Page 2
6
User Page 3
7
User Page 4
8
Normal speed/Double speed
9
Reserved
A
Reserved
B
Reserved
C
Reserved
D
Reserved
E
Reserved
F
Reserved
Camera settings can be saved into four different user pages. Once the user page is saved and set
between shutter speeds 4 and 7, it will be activated as long as the camera is powered ON. User
Page works in both rear plate control and RS232C communication selections.
3.5 Gain Control (AGC/MGC)
Manual gain control (MGC)
MGC is standard factory setting on this
camera. The manual gain control can be
adjusted from 9 dB to 18 dB only due to the
factory default setting of AGC and AGC MAX
control. Adjusting the gain potentiometer
located on rear panel, in figure 6, will change
the gain value.
Automatic gain control (AGC):
AGC is not available and it is not
recommended to use by UNIQ.
Contact UNIQ for further details
N/A
Move up or down to adjust gain
Move up or down to adjust reference
Move up or down to recall factory page
Up: Recall; Down: Save
Up: Recall; Down: Save
Up: Recall; Down: Save
Up: Recall; Down: Save
Up: Normal speed; Down: Double speed (N/A)
Figure 5. Up/Down Switch
7
Up/Down Switch
Figure 6. AGC Control Characteristics
Advertisement
Table of Contents
