Determining Wall Plate Location Under Your - Samsung ME17R7021EW/AC Installation Instructions Manual

C. DETERMINING WALL PLATE
LOCATION UNDER YOUR CABINET
Plate position – beneath flat bottom cabinet.
C L
At least 30˝
Draw a vertical line on the wall at the center of the 30˝
wide space.
Tape the Rear Wall Template onto the wall matching the
centerline and touching the bottom of the cabinet.
Plate position – beneath recessed bottom cabinet
Plate position – beneath recessed bottom
with front overhang.
cabinet with front overhang
OTR_II_DE68-03587B-07_EN+CFR.indb 9 OTR_II_DE68-03587B-07_EN+CFR.indb 9
Step-by-step installation guide
16 ²⁹∕₃₂˝
Draw a line on the
Draw a line on the
back wall equal to
back wall equal to the
the depth of the front
depth of the front
overhang.
overhang.
` i
30˝ to Cooktop
30" to Cooktop
9
Plate position – beneath framed recessed cabinet
bottom.
C L
Draw a vertical line on the wall at the center of the 30˝
wide space.
Tape the Rear Wall Template onto the wall matching the
centerline and touching the bottom cabinet frame.
Your cabinets may have decorative trim that interferes
with the microwave installation. Remove the decorative
trim to install the microwave properly and to make it
level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no back
or side frame, install the mounting plate down the same
distance as the front overhang depth. This will keep the
microwave level.
1. Measure the inside depth of the front overhang.
2. Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
3. For this type of installation with front overhang only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
30˝ to Cooktop
2022-01-20 2022-01-20 10:11:53 10:11:53