Installation - Blaupunkt RVC 4.1 KH Owner's Manual

INSTALLATION

B. Installation Guide For Bracket-Mount Camera
1. Choose a flat position
near license plate light
and make a small hole
for the first screw with
a drill.
4. Mark the position
found for second
screw and make a
hole with a drill.
Remarks:
Beside flush and bracket mount cameras, we also have bolt mount camera series,
which is mounted by following steps:
1. Select suitable flat position near the license plate light and mark it.
2. Drill a hole according to the bolt diameter.
3. Put the bolt vertically (against ground) into the hole and fix the bolt with the
screw supplied from inside.
4. Some models come with up/down image switch option, and can be mounted
with its bolt horizontal (against ground) and its lens downward.
2. Use a screw driver to
fix the first screw (but
not tightly).
5. Fix the second screw
with a screw driver.
3. Get the power/video
cables connected, and
then adjust the camera
properly to find the
best position for the
other screw according
to the camera image in
monitor.