Step 3 Install Coprocessor,
Continued
Test for Math Coprocessor
The AMIBIOS displays a System Configuration screen at the end of AMIBIOS POST (Power On Self Test). The math
coprocessor will be displayed here.
If the Installed message is not displayed, reinstall the coprocessor. Switch off the power, check the orientation of the
coprocessor, press the chip firmly to make sure that it is fully inserted, and then power the system up again. If the same result
occurs, call Technical Support.
Step 4 Install the Motherboard
The mounting hole pattern on the Mark V Baby Screamer motherboard is identical to the mounting hole pattern on the IBM
XT™ motherboard. See the following graphic.