Chassis - Chrysler 2004 Crossfire Manual

222 MAINTAINING YOUR VEHICLE

Chassis

Component
Automatic Transmission
Brake Master Cylinder
Clutch Fluid
Manual Transmission Fluid
Power Steering Reservoir
Rear Axle Fluid
Tire Pressure
Fluids, Lubricants and Genuine Parts
Only use ATF approved to MB 236.10, MB 236.12. Synthetic Dexron III
Transmission Fluid may be substituted.
Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with:
minimum dry boiling point (ERBP) 500°F (260°C), minimum wet boiling
point (WERBP) 356°F (180°C), maximum viscosity 1500 mm
conforming to FMVSS 116 and ISO 4925.
Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with:
minimum dry boiling point (ERBP) 500°F (260°C), minimum wet boiling
point (WERBP) 356°F (180°C), maximum viscosity 1500 mm
conforming to FMVSS 116 and ISO 4925.
No fluid service required. Only use fluid approved to MB 236.2. SAE
5W-20 engine oil, meeting API SL or GF-3, may be substituted.
No fluid service required. Filled at the factory with Pentosin CHF 11S.
Steering noise and reduced component life may result if an unapproved
fluid is used.
Only use synthetic SAE 75W-85 axle lubricant that meets MB 231.1.
Reduced axle durability may result if an unapproved product is used.
Refer to label on driver's door frame.
2
/s,
2
/s,