Cook By Weight; Multi-Stage Cooking - Oster OGMD21103 Instruction Manual

Cook by weight

1. In standby mode, press COOK BY WEIGHT button once.
2. Use number buttons (1~3) to select a food code.
3. Use number buttons to set food weight.
4. Press START/STOP button to confirm.
Cook by weight code description:
Code
1
2
3
NOTE:
Meat must be defrosted and at refrigerated temperature.
Weight must be in pounds and ounces. If label gives weight in pounds only,
change the fraction of a pound to ounces using the chart given above.
During cooking, the system will pause and sound to remind user to turn food over,
after that press START/STOP to resume cooking.
Let meat stand a few minutes before carving.

Multi-stage cooking

Your oven can be programmed for up to 3 automatic cooking sequences. Only when
speed defrost be set in the first sequence, you can set 3 cooking sequences.
Microwave cooking can only be set 2 cooking sequences. Speed defrost can only be
set in the first sequence.
Suppose you want to set the following cooking program:
Microwave cooking
Microwave cooking (with lower power level)
1. Open the door and place the food into the oven, close it.
2. Input the speed defrost cooking program. Do not press START/STOP button.
3. Press COOK button once.
4. Input the microwave cooking program. Do not press START/STOP button.
5. Press COOK button once.
6. Input the second microwave cooking program.
7. Press START/STOP button to start.
Type Maximum Weight
Beef
Mutton
Pork
Speed defrost
5 lb. 16 oz.
5 lb. 16 oz.
5 lb. 4 oz.
11