Advertisement
Diagnosis
This image indicates the L and R channels are muted.
3.
FUNCKEY
Press the [+]/[-] buttons to select "C02", then press [
the same time to exit.
When a button is pressed, the display will show the current button value and sound a "Dee" tone. If there
is any error, it will produce a "Bang" tone, and the display will show "Err".
This image indicates no button has been pressed.
This image indicates there's an error, a "Bang" tone will sound.
When one of these buttons are pressed, the display will show its corresponding value, and a "Dee" tone
will sound.
] to start this test. Press [+] and [-] at
START/STOP
24
Advertisement
