Advertisement
INSTALLATION
Ceiling Mount
1. Locate the mounting template at the installation position and drill the wall.
2. Hammer the 4 expansion screws into the wall holes drilled
3. Route the power and BNC cable through the box
4. Tight the box base to wall through the four screws
5. Insert the box ring to the mounting plate for waterproofing
6. Tight the box cover to the box base through the four screws.
7. Connect the power and BNC cable with the camera cables
8. Set the camera's viewing angle
9. Fix the bracket of camera to the box cover
Wall Mount
The Junction Box allow you mount on the wall. Details operation steps please refer to the Ceiling Mount.
AK-21 Quick Installation Guide (EN)
Advertisement
