Advertisement
INSTALLATION
Wall Mounting
1. Locate the mounting template at the installation position and drill the wall.
2. Hammer the 4 expansion screws into the wall holes drilled
3. Route the power and BNC cables through the box
4. Tight the box to wall through the four screws
5. Put the stopper through the camera's cable and connect the power and BNC cable with the
camera cables
6. Tight the camera screws to fix it the box
7. Set the camera's viewing angle
8. Insert the box ring and stopper to the mounting box for waterproofing
9. Put the dome cover to the dome unit and tighten screws.
Pillar Mount
1. Install Pillar bracket on a pole,
2. Then assemble the box to Pillar bracket, details operation steps please refer to the above
Wall Mount
AK-20 Quick Installation Guide (EN)
Advertisement
