Polaris Sportsman Touring 570 EPS 2021 Owner's Manual page 69

Bluetooth functionality is compatible with both iOS and Android phones. For
iOS phones, you must go to the Settings option and enable notifications. Most
Android phones will prompt the user automatically to enable notifications as
1. Make sure Bluetooth is enabled on
your phone.
2. Access the options menu on the
vehicle's digital gauge and select BT
PAIR. The Bluetooth icon will begin
to blink.
3. Find and select Polaris Gauge on
your phone's Bluetooth menu or
prompt. Pairing should occur
momentarily. Pairing mode will
continue for up to 90 seconds or if
you exit the BT PAIR menu.
After successfully pairing the phone, the vehicle's digital gauge will automatically
reconnect with the phone each time it is powered on and within range. No further
action is required by the user at this point.
Once the digital gauge is powered off, Bluetooth connectivity will cease. Also,
when a new phone is paired with the digital gauge, all missed call and text
information from the previous phone will be erased. Up to 16 different phone
pairings can be saved to the digital gauge. The digital gauge does not support
SAFEGUARDS
• If a text message is received while the vehicle is moving faster than 2 KPH,
only the sender's name is shown onscreen.
• If you are browsing any of the Bluetooth menus and the vehicle starts to move
faster than 2 KPH, the menu will automatically display VEHICLE MOVING.
• If you attempt to access Bluetooth menus while the vehicle is moving faster
than 2 KPH, the screen will display VEHICLE MOVING momentarily, and then
it will redirect to the options menu.
Downloaded from ManualsNet.com
part of the pairing process.
systems below Android version 4.2 and iOS version 8.4.
search engine
FEATURES AND CONTROLS
NOTE
NOTE
67