Polaris Sportsman Touring 570 EPS 2021 Owner's Manual page 53

HITCH REMOVAL / INSTALLATION
1. To remove the hitch, remove the cotter pin
hitch, then reinstall the hitch pin
2. To install the hitch, remove the cotter pin
the hitch pin
3. Install the hitch to the receiver.
4. Reinstall the hitch pin (from the left side of the hitch) through the bore of both
the receiver and the hitch.
5. Reinstall the cotter pin. Make sure the hitch assembly is secure at that the
cotter pin is properly engaged over the hitch pin.
After 1000 km of use, tighten the bolt holding the trailer ball to the hitch to 445
Downloaded from ManualsNet.com
w
.
search engine
FEATURES AND CONTROLS
q
and hitch pin
w
and secure the cotter pin
q
from the hitch pin and remove
NOTICE
N·m.
w
. Remove the
q
.
51