Download Print this page

Haugen MFSH-6TS Installation And Safety Manual page 2

Fork mounted swivel hooks

Advertisement

Thank you for choosing a Haugen Swivel Hook
Before you use this Swivel Hook you must read and understand the
Keep a copy of this manual on the Swivel Hook Trailer Spotter at all times
Swivel Hook Trailer Spotter Combo
Haugen Swivel Hooks with Trailer Spotter are designed for use on rough terrain extendable or
straight mast forklifts, and industrial lift trucks. They have been tested , proven and rated for the
Load Capacities as shown on the Swivel Hook. Haugen Attachments has been building Industrial
Swivel Hook Trailer Spotters for many years, these units have proven themselves durable and ex-
tremely safe throughout the United States and Canada
Swivel Hook Trailer Spotters are designed to hold a Swivel Hook at a standard 24" load center.
Forklifts are normally designed with a 24" loader center. Since the swivel hook is located at the 24"
loader center the forklifts load chart will normally apply, less the empty weight of the attachment,
rigging and the weight of the load. A seperate down rated load chart should not be needed for the
forklift. The 2" reciever is held at 48" and is designed to hold standard reciever hitches. This is for
pulling trailers only. It is Engineered with a Tongue weight capacity of 2000 lbs and a pull rating of
10,000 lbs.
Note the rating of the Swivel Hook Trailer Spotter does not reflect the rating of the Forklift or Tele-
handler. The total load must never exceed the rating of the Forklift or Telehandler.
Engineering Certification
The Haugen Swivel Hook Trailer Spotters have been designed and built to comply with the ANSI/
TISDF B56.6-2011 and the CSA B335 safety standards. The Swivel Jibs have been tested and
certified by a third party Certified Professional Engineer. A copy of their report is at the back of the
owners manual. If required a copy of the full engineering report is available upon request.
Marv Haugen Enterprises * 1851 Heartland Ave * Casselton ND 58012
Operator's Manual
If you have questions call us at 1-877-580-6218
Marv Haugen Enterprises
1851 Heartland Ave. - Casselton, ND 58012
Toll Free 877-580-6218
Phone: 701-347-4827 Fax: 701-347-4830
Phone: 877-580-6218

Advertisement

loading

This manual is also suitable for:

Mfsh-10ts