Page 2
The total load must never exceed the rating of the Forklift or Telehandler. Engineering Certification The Haugen Swivel Hook Trailer Spotters have been designed and built to comply with the ANSI/ TISDF B56.6-2011 and the CSA B335 safety standards. The Swivel Jibs have been tested and certified by a third party Certified Professional Engineer.
Page 3
3. Disable any hydraulic functions to the Forklift Carriage. Such as tilting or swinging functions. 4. Position the fork tines so that the Swivel Hook Trailer Spotter will hold the load centered on the Forklift. Marv Haugen Enterprises * 1851 Heartland Ave * Casselton ND 58012 Phone: 877-580-6218...
Page 4
Marv Haugen Enterprises 1851 Heartland Ave. - Casselton, ND 58012 Toll Free 877-580-6218 Phone: 701-347-4827 Fax: 701-347-4830 General Operating Rules 1. Inspections as stated above must be made prior to each use of the Swivel Hook Trailer Spotter 2. Before each use make sure the Swivel Hook Trailer Spotter is properly installed on the fork tines and that the hook is secured to the Swivel Hook frame and the bolt is tight.
Page 5
Vertical Center of Gravity 1.43” 14.00” 30.00” 24.64” Horizontal Center of Gravity Model = MFSH-6TS Model = MFSH-10TS Empty Weight = 198 lbs Empty Weight = 203 lbs Vertical Center of Gravity = 1.43” Vertical Center of Gravity = 1.43”...
All warranty claims must include detailed information regarding make and model of the vehicle on which the Haugen product was mounted, hours of use, description of events that led up to the failure, and any other information helpful in reviewing this claim. All warranty returns must be prepaid. Shipments arriving at our factory on a freight collect basis will be refused by our recieving department.
Page 8
Marv Haugen Enterprises Inc. * 1851 Heartland Ave. * Casselton ND 58012 * Phone: 877-580-6218...