Table of Contents
Advertisement
FILTER button
Press and hold the FILTER button for more than 5 seconds
to operate electrically operated filter to replace the filter.
✔
Note:
• When the filter is replaced, the total accumulated time of the filter
use is automatically set to 0.
FREEZE button
Press the FREEZE button on the remote control unit to
freeze the picture on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any other
button.
MOUSE POINTER button
Move the pointer on the screen with this button.
POINTER button
Press POINTER button on the remote control unit to display
the Pointer on the screen.
P-TIMER button
Press the P-TIMER button on the remote control unit. The
Timer display "00 : 00" appears on the screen and starts to
count time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.
KEySTONE button
Press the KEYSTONE button on the remote control unit. The
"Keystone" appears on the screen.
Use the Point ed7 8 buttons to correct keystone
distortion. The keystone adjustment can be stored (pp.46,
50).
Reduce the upper width with
Point
button.
e
Reduce the lower width
with Point
button.
d
Remote Control Unit
KEySTONE
button
✔
Note:
• See the previous page for the
description of other buttons.
P-Timer display
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control unit again while the Keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
• The adjustable range can be limited depending on
the input signal.
• "Keystone" disappears after 10 seconds.
Reduce the left part with
Point
button.
7
Basic Operation
MOUSE
POINTER
button
POINTER button
P-TIMER button
FREEZE button
FILTER button
Reduce the right part with
Point
button.
8
35
Advertisement
Table of Contents
