Table of Contents
Advertisement
Picture Image
COLOR SELECTION MODE (continued)
COLOR M .
Return to the COLOR MANAGEMENT POINTER. (If you press
the MENU button on the side control or the remote control
unit, it returns to the COLOR MANAGEMENT POINTER and
you will need to reselect and readjust the color.)
MENU
Return to the IMAGE ADJUST Menu. Any settings that
have been changed will not be stored. To store the changed
settings, be sure to select "LIST" and go to the COLOR
MANAGEMENT LIST.
4
In the COLOR MANAGEMENT LIST, the adjusted color data
are checkmarked. You can decide whether or not to apply the
adjusted color data in the list to the projected image (see
below).
LIST MODE
Clear the check mark if you do not want to apply the adjusted
color data; select the check mark and then press the OK
button. The check mark disappears.
COLOR PALETTE
Return to the COLOR SELECTION mode so that you can
readjust the setting for the color in that line. (This option is
not available if the check mark is cleared.)
DEL
Select the DEL box if you want to delete the adjusted data.
Press the OK button and a confirmation box appears and then
select [Yes].
ALL DEL
Delete all the data in the list. Press the OK button and a
confirmation box appears and then select [Yes].
MENU
The same function as stated above.
COLOR M .
The same function as stated above.
Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture
control position (Off, L1 or L2).
Off . . . . Auto picture control OFF position.
L1 . . . . . Auto picture control LEVEL 1 position.
L2 . . . . . Auto picture control LEVEL 2 position.
Advanced color*
Use the Point 7 8 buttons to select the advanced color mode.
Off . . . . Advanced color mode is "Off" .
Auto . . . Advanced color according to the type of image.
Color temp .
Use the Point 7 8 buttons to select the desired Color temp. level
(High, Mid, Low, or XLow).
52
COLOR SELECTION MODE
Level and phase
adjustment palette.
LIST
COLOR M .
LIST MODE
ALL DEL
MENU
*This function controls the operation of the Color
Control Device, which independently and automatically
regulates the amount of yellow light passing through
the LCD panel, to accurately reproduce both image
color and image brightness. Normally leave Auto
(default setting).
✔
Note:
White balance may change depending on the image.
•
Gamma
adjustment palette.
MENU
COLOR PALETTE
DEL
COLOR M .
Advertisement
Table of Contents
