Siemens HR538AB 1 Series User Manual And Installation Instructions page 22

Table of Contents

Advertisement

en Descaling
15.2 Cleaning the appliance
In order to avoid damaging the appliance, you must
clean your appliance only as specified, and with suit-
able cleaning products.
WARNING ‒ Risk of burns!
The appliance and its parts that can be touched be-
come hot during use.
Caution should be exercised here in order to avoid
touching heating elements.
Young children under 8 years of age must be kept
away from the appliance.
WARNING ‒ Risk of fire!
Loose food remnants, fat and meat juices may catch
fire.
Before using the appliance, remove the worst of the
food residues and remnants from the cooking com-
partment, heating elements and accessories.
Requirement: Read the information on cleaning
products.
→ "Cleaning products", Page 20
Clean the appliance using hot soapy water and a
1.
dish cloth.
For some surfaces, you can use alternative
cleaning agents.
→ "Suitable cleaning agents", Page 20
Dry with a soft cloth.
2.
15.3 Cleaning self-cleaning surfaces in the
cooking compartment
The back panel in the cooking compartment is self-
cleaning. The self-cleaning surfaces are coated with a
porous, matte ceramic layer and have a coarse sur-
face. When the appliance is in operation, the self-clean-
ing surfaces absorb splashes from baking, roasting or
grilling and break them down. If the self-cleaning sur-
16  Descaling
To ensure that your appliance continues to operate cor-
rectly, it must be descaled regularly.
The frequency with which the appliance must be de-
scaled depends on the hardness of the water used.
The
​ ⁠ symbol reminds you to run the descaling pro-
gramme.
There are four steps in the descaling programme. For
hygiene reasons, the descaling programme must be
run through completely so that the appliance can be
ready for operation again. Descaling takes around 90–
110 minutes in total:
Display
Step
​ ⁠ ​ ⁠ ​ ⁠
First step: Descaling
Approx. 65 min
​ ⁠ ​ ⁠ ​ ⁠
Second step: Rinse cycle
Approx. 9 min
22
faces no longer clean themselves adequately during
operation, heat up the cooking compartment specific-
ally to the right temperature.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
If dark stains are visible on the self-cleaning sur-
faces, heat up the cooking compartment.
Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
Remove accessories and cookware from the cook-
1.
ing compartment.
Detach the shelf supports and remove them from
2.
the cooking compartment.
→ "Shelf supports", Page 23
Remove coarse dirt using soapy water and a soft
3.
cloth:
– From the smooth enamel surfaces
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
Use the function selector to set 3D hot air.
5.
Use the temperature selector to set the maximum
6.
temperature.
a The appliance starts heating after a few seconds.
Switch off the appliance after one hour.
7.
Once the appliance has cooled down, wipe the
8.
cooking compartment with a damp cloth.
Note: Marks may appear on the self-cleaning sur-
faces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the self-
cleaning surfaces.
Attach the shelf supports.
9.
→ "Shelf supports", Page 23
Display
Step
​ ⁠ ​ ⁠ ​ ⁠
Third step: Rinse cycle
Approx. 9 min
​ ⁠ ​ ⁠ ​ ⁠
Fourth step: Rinse cycle
Approx. 9 min
16.1 First step ( ​ ⁠ ​ ⁠ ​ ⁠ )
ATTENTION!
The length of time for which the descaler is left to work
is based on the recommended, liquid descaler. Other
descalers may damage the appliance.
Only use the liquid descaler recommended by us
for the descaling programme.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
Remove descaling solution immediately with water.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr538abs1

Table of Contents