Advertisement
Operation guide for Samsung three-door refrigerator
PREPARATIONS BEFORE USE
By completing the following steps, the refrigerator should be fully operational. If
not, first check the power supply and electricity source. If you have any further
questions, please contact the nearest Samsung service center.
1. Install the shelves and containers which are dismantled for transportation at
correct locations.
2. Clean all compartments and accessories and remove the dust accumulated
during packaging and shipping.
3. Once the refrigerator is powered on, make sure the interior light comes
on when you open the door of fridge compartment or interchangeable
temperature compartment (optional).
4. After being powered on for one hour, the refrigerator will be cool slightly. And
the compressor should run smoothly with gentle buzz.
5. Once the refrigerator temperature is sufficiently cool, you can store food in
the refrigerator.
Please remember that after starting the refrigerator, it will take a few hours to
reach the appropriate temperature.
NOTE
• Before connecting the power supply, check the voltage range. The wires and
sockets must be able to withstand the current of 10A or above.
INITIAL POWERING ON AND TEMPERATURE ADJUSTMENT
display
10_Operation
After connecting the power, all displays will be on for
3 seconds and then the refrigerator enters the initial
powering on mode, namely, the temperature is set to
o
5
C for fridge compartment, 0
temperature compartment and -18
compartment. The temperature display zone displays
the current set temperatures.
o
C for interchangeable
o
C for freezer
Advertisement
