Quick Start; Hardware Preparation Before Use; Software Preparation - Ebyte E90-DTU-V8 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
E90-DTU(433L30E)-V8 User Manual

2. Quick Start

2.1. Hardware preparation before use

Take the transparent transmission between E90-DTU(433L30E)-V8 and E90-DTU(433L30)-V8 as an example.
In order to test E90-DTU(433L30E)-V8, the following hardware is required:
One PC with network port;

One E90-DTU(433L30E)-V8, hereinafter referred to as "gateway radio";

One E90-DTU (433L30)-V8

buy it separately);
TX433-JKD-20P 2 antennas (inner thread, inner needle);

Two DC12V-1A power adapters;

One network cable;

One USB to RS-485 serial cable;

PC
cable

2.2. Software Preparation

The product details on the Ebyte official website provide the download of the network debugging assistant
"NetAssist" and the serial port assistant "XCOM", as shown in the following figure. Official website address:
https://www.ebyte.com.
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.
digital radio, hereinafter referred to as "serial radio" (for example, if necessary,
E90-DTU(433L30E)_V8
DC12V-1A Power Supply*2
E90-DTU(433L30)-V8
USB To serial port +
several cables
TX433-JKD-20P*2
2