Related Manuals for Ebyte E610-DTU(433C30)E
Summary of Contents for Ebyte E610-DTU(433C30)E
- Page 1 E610-DTU(433C30)E User Manual Chengdu Ebyte Electronic Technology Co.,Ltd. E610-DTU(433C30)E Ethernet Gateway User Manual Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 2: Table Of Contents
4.4.3 UDP server ............................. 21 4.4.4 UDP client .............................. 22 4.4.5 HTTP client ............................22 （1）、 G ET usage demonstration ........................22 （2）、 POST ............................... 24 4.5 Web page configuration ............................25 Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 3 5.13.7 Simple protocol conversion demonstration case ..................41 Chapter6 Configuration method ............................43 6.1 Web page configuration ............................43 6.2 PC configuration ..............................43 6.3 Network A T command configuration ........................43 Revision History ...................................44 About us ....................................45 Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 4: Chapter1 Product Description
E 610 -DTU( 433C30 )E is a wireless gateway (Ethernet interface data transmission radio) that supports 10M/100M rate and is developed by Chengdu Ebyte based on wireless communication technology and Ethernet protocol . Supports 2-way Socket, provides six working modes: TCP Server , TCP Client , UDP Server , UDP Client , H TTP Client, M QTT Client , and supports 6 clients in TCP server mode. - Page 5 Supports RSSI signal strength indication function for evaluating signal quality, improving communication networks, and ranging; Supports users to set their own communication keys, which cannot be read, greatly improving the confidentiality of user data; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 6: Chapter2 Quick Start
Serial line 2.2 Software preparation on Ebyte's official website provide downloads of the network debugging assistant "Net Assist " and the serial port assistant "X COM ", as shown in the figure below. Official website address: https://www.ebyte.com Copyright ©2012–2024 ,... -
Page 7: Hardware Connection
E610-DTU(433C30)E User Manual Chengdu Ebyte Electronic Technology Co.,Ltd. Download the configuration tool corresponding to the product details. "Gateway Radio" uses the "Ebyte Network Configuration Tool" and "Serial Radio" uses the "E610-DTU Configuration Host Computer.exe " configuration tool. 2.3 Hardware connection... -
Page 8: Wireless Parameter Configuration
Step 3: Open the configuration host computer "E610_RF_Setting.exe" and select the corresponding serial port; Step 4: "Open serial port" and click "Read parameters" . After completion, switch to continuous transmission mode ; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 9: Configure "Gateway Radio
Step 2: Modify the IPv4 configuration of the PC , use static IP , and ensure that the "gateway radio" and the PC are in the same network segment. The factory default IP is 192.168.4.101 , so configure the static IP of the PC as 1 Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 10 Chengdu Ebyte Electronic Technology Co.,Ltd. 92.168.4.100 is shown in the figure below: Step 3: Open "Ebyte Network Configuration Tool" , click Search Settings, select the device and check the current parameters ; Note: You need to set the baud rate of the communication partner, because the appropriate airspeed is automatically matched according to the baud rate! ! ! (important) Step 4: Configure wireless parameters as shown in the figure above.
-
Page 11: Network Parameter Configuration
If the connection can be made but the indicator light does not light up, the device is in configuration mode and can be released by restarting the device), XCOM connection " Serial gateway": Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 12: Tcp Client Usage
Chengdu Ebyte Electronic Technology Co.,Ltd. Data sending and receiving test: 2.5.2 TCP client usage Configure the Ethernet parameters of the "Gateway Radio". The host computer and web page are configured as follows: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 13: Udp Server Uses
After the configuration is completed, the L INK indicator light of the device is always on, and the Network Assistant (Net Assist) connects to the "Gateway Radio" as shown in the figure below: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 14: Udp Client Uses
Data sent through the serial port can only be received by the UDP of the last communication ): 2.5.4 UDP client uses Configure the Ethernet parameters of the "Gateway Radio". The host computer and web page are configured as follows: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 15 (Net Assist) connects to the "Gateway Radio" as shown in the figure below: Data sent through the serial port for data transmission and reception testing will only be received by U DP (192.168.4.100:8887) : Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 16: Chapter3 Technical Indicators
84 mm × 82 mm × 25 mm Average weight 1 30 ± 5 g Operating temperature -40 ~ +85℃, industrial grade Storage temperature -40～+125℃, industrial grade Working humidity 10% ~ 90%, relative humidity, no condensation Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 17: Wireless Specifications
The power adjustment function cannot accurately feedback the actual transmit power of "medium", "low" and "extremely low". The values in the table are for reference only and other powers can be customized; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 18: Mechanical Dimensional Drawing
E610-DTU(433C30)E User Manual Chengdu Ebyte Electronic Technology Co.,Ltd. 3.3 Mechanical Dimensional Drawing Unit:mm Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 19: Pin Definition
Serial port transceiver indicator light , yellow, flashes when DATA receiving data from the server or radio frequency module data SMA antenna interface (external screw, internal hole) Reload Restore to factory settings button Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 20: Chapter4 Product Basic Functions
Serial port baud rate and serial port check digit: be consistent with the communicating serial port device, otherwise communication will fail; Transmit power: The transmit power can be reduced according to actual needs, and "high" power is recommended; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 21: Broadcast Monitoring
At the same time, node 1 and node 2 have the same address, so the data sent by node 1 can be received by node 2. 2 relay The ADDH\ADDL of relay 2 are 33 and 05 respectively. So relay 2 can forward relay 1's data to network NETID: 05. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 22: Ethernet Part
IP conflicts , otherwise the equipment will not be able to access and configure the web page normally. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 23: Device Port
In static IP mode, the default factory address of the domain name resolution (DNS) server is: 114.114.114.114 , which can be customized by the user. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 24: Target Ip/ Domain Name
Using UDP Server requires the remote UDP device to send data first, otherwise the data cannot be sent normally. [Note] In U DP mode, the data sent by the network to the device should be less than 5 12B it per packet, otherwise data loss will occur . Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 25: Udp Client
(local port: 0). Take the host computer configuration as an example. . Return data configuration without header (line break can be entered in the H TTP header input box): Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 26 Chengdu Ebyte Electronic Technology Co.,Ltd. "Serial radio" (additional purchase required), wireless connection, refer to "Quick Start", no further explanation here, request data demonstration: Return data configuration with header: Request a data demo: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 27: 2）、 Post
Return data configuration without header (line break can be entered in the H TTP header input box): Return data configuration with header (line break can be entered in the H TTP header input box): Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 28: Web
( the IP address and the computer must remain in the same network segment. If it cannot be used, close the firewall and try again). If you forget the local IP , you can query it through AT commands and configuration software; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 29 （3）、 After modifying the parameters, you can click Save Parameters in the device management at the bottom ; （4）、 After the successful operation is displayed, click the Restart Device button on the right, and the parameters will take effect ; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 30: Hardware Factory Reset
To restore the buttons to factory settings, you need to effectively connect the network cable and power supply. Press and hold the Reload pin of the device until the LED indicator lights up to release the buttons. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 31: Chapter5 Advanced Features
FE AA 01+data, then the data will only be transmitted to Socket 2 , and the received content only contains data, without the data header; The data sent by the serial port is arbitrary data, and the data will be transmitted to two Sockets. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 32 Socket 1 sends any data. After the serial port receives it, it will add the data header AA FE 55 00 before the data. Socket 2 sends arbitrary data. After the serial port receives it, it will add the data header AA FE 55 01 before the data. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 33: Disconnect And Reconnect
The gateway can be configured with a wireless heartbeat packet, which means it regularly sends data to the opposite device wirelessly. You can choose to send MAC/SN and customized data. The customized data is limited to 128 bytes, Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 34: Registration Package
This product does not support remote configuration. Remote configuration requires that the remote device and the configuration device can communicate normally, otherwise the configuration instructions cannot reach the Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 35: Remote Upgrade
Steps to upgrade firmware via web page : Step 1: Open the host computer, open the device upgrade assistant in the menu bar, and select the required firmware (the official website provides downloadable firmware); Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 36 [Note] When the device is first powered on, click "Search Device" in the upgrade assistant and the device will enter the firmware burning state. It will return to normal mode after powering off and restarting. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 37: Modbus Gateway
Simple protocol conversion can work in any mode ( TCP client, TCP server, UDP client, UDP server, MQTT client). No matter what mode it works in, there can only be one Modbus master station. Simple protocol conversion configuration: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 38 E610-DTU(433C30)E User Manual Chengdu Ebyte Electronic Technology Co.,Ltd. Modbus Poll and Modbus Slave software debugging : Software connection settings: Software register reading and simulation configuration: Poll menu select Set up Read/Write Definition Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
- Page 39 E610-DTU(433C30)E User Manual Chengdu Ebyte Electronic Technology Co.,Ltd. Slave menu select Se tup Slave Definition Communication demo: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 40: Multi-Host Mode
"storage gateway". It is recommended to configure "simple protocol conversion" when there are no multiple hosts. Multi-host mode configuration: Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 41: Storage Gateway
Features: （1） The gateway has a 3K cache for storing instructions and returned results (reading 10 holding registers as an example, it can store approximately 100 instructions and returned results); Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 42: Configurable Gateway
Due to the above characteristics, the serial port side of the configurable gateway can only be connected to Modbus slave stations. Instruction storage instructions (added, instruction errors and format errors cannot be added): Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 43: Automatic Upload
RTU format or Modbus TCP format) according to your needs. ) and the command polling interval (0-65535ms). For command pre-storage, refer to "Configurable Gateway-Command Storage Instructions" and automatically upload the host computer/webpage configuration: TCP client demonstration (Modbus RTU format): Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 44: Simple Protocol Conversion Demonstration Case
Here you can configure the timeout to 2000 ms (leave a certain margin, do not use 1 400ms directly ), the terminal device ( For example, the timeout time of Modbus Poll software ) should be greater than or equal to the timeout time of the gateway. Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. - Page 45 Chengdu Ebyte Electronic Technology Co.,Ltd. Step 2: Enable Modbus gateway function (simple protocol conversion); Step 3: Use Mod bus Poll and Modbus Slav e software to test the configuration. Refer to "Simple Protocol Conversion"; Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
-
Page 46: Chapter6 Configuration Method
The wireless network card can be configured through the web page. 6.3 Network A T command configuration After enabling network AT, the configuration can be completed through AT commands. For specific AT commands, please refer to " AT Command Set". Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 47: Revision History
E610-DTU(433C30)E User Manual Chengdu Ebyte Electronic Technology Co.,Ltd. The final right of interpretation belongs to Chengdu Ebyte Electronic Technology Co., Ltd. Revision History Version Revision date Revision Notes Maintenance man 2024-3-14 initial version Copyright ©2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd. -
Page 48: About Us
Chengdu Ebyte Electronic Technology Co.,Ltd. About us Technical support: support@cdebyte.com Documents and RF Setting download link: www.ebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com ------------------------------------------------------------------------------------------------- Phone: +86 4,000-330-990 Web: www.ebyte.com Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China Copyright ©2012–2024 ,...