Setup The Display Console - Raddy L7 User Manual

3.4.2 Setup the Display Console

1. Plug in the display console with power adapter.
BL ON will display in the time area for three seconds when
powered up. Conversely, The AC OFF icon will display .
Note: It is recommended to plug in the power adapter to
reduce the battery consumption and extend the service life.
The console will instantly display indoor temperature, humidity,
dew point, air pressure, weather forecast, moon phase, time
and date.
2. Display Console Batteries Installation
Remove the battery door on the back of the display, as shown
in Figure 8. Install three AAA (alkaline or lithium) batteries. The
display will beep once and layout of display will light up for a
few seconds to verify all segments are operating properly.
- 11 -