Omnitronic XIRA-215A User Manual page 11

Ambient Conditions
• The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C.
• This device must only be operated in an altitude
between -20 and 2000 m over NN.
• Never use the device during thunderstorms. Over
voltage could destroy
disconnect the device during thunderstorms.
• This device must never be operated or stockpiled
in surroundings where splash water, rain, moisture
or fog may harm the device. Moisture or very high
humidity can reduce the insulation and lead to
mortal electrical shocks.
• When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and
is installed in a distance of 0.5 meters between
smoke machine and device.
Installation
• Do not shake the device. Avoid brute force when
installing or operating the device. When choosing
the installation spot, please make sure that the
device is not exposed to extreme heat, moisture or
dust. There should not be any cables lying around.
You endanger your own and the safety of others!
• Please note that speaker systems could move due
to bass beats and
unintended pushes from DJs, musicians or the
audience present further risk. This is why the
speaker system must always be secured against
moving or the respective area has to be blocked.
Setup
• Operate the device only after having familiarized
with its functions. Do not permit operation by
persons not qualified for operating the device. Most
damages are the
operation!
• During the operation, please make sure that the
loudspeakers always sound well. When distortions
can be heard, either the amplifier or the
loudspeakers are overloaded. Overloads can
quickly lead to amplifier or speaker damage. In
order to avoid damage, please reduce the volume
immediately when distortions can be heard. Always
check the sound pressure level with a meter in
order to keep to the threshold.
Commercial Use
• Operating an amplification system in public or
industrial areas, a series of safety instructions have
to be followed. The operator must therefore inform
himself on the current safety instructions and
consider them.
Cleaning and Service
• Disconnect from mains before cleaning! Never use
solvents or aggressive detergents in order to clean
the device! Rather use a soft and damp cloth.
• There are no serviceable parts inside the device
except for the fuse. Maintenance and service
operations are only to be carried out by authorized
dealers! Should you need any spare parts, please
use genuine parts.
the device. Always
vibrations. Furthermore,
result of unprofessional
Transport
• Please use the original packaging if the device is to
be transported.
Serial Barcode
• Never remove the serial barcode from the device
as this would make the warranty void.
Modifications and Warranty
• Please consider that unauthorized modifications on
the speaker system are forbidden due to safety
reasons!
• If this device will be operated in any way different
to the one described in this manual, the product
may suffer damages and the warranty becomes
void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, etc.
WEEE Directive
If the unit is to be put out of operation
definitively, take it to a local recycling plant for
a disposal which is not harmful to the
environment. Do not dispose of as municipal waste.
Contact your retailer or local authorities for more
information.
Intended Use
The speaker system is suitable for permanent
installations and mobile live applications. It was
designed for indoor use only.
11 • EN