Troubleshooting; Camera; When The Power Is Turned On - Canon PowerShot SD750 User Guide Advanced User Manual

Troubleshooting

Camera

Camera will not operate.
Power is not turned on.
Memory card slot/battery
cover is open.
Battery charge insufficient
to operate camera
("Change the battery
pack" message displays).
Poor contact between
camera and battery
terminals.
Sounds come from the camera interior.
The camera's horizontal/
vertical orientation was
changed.

When the power is turned on

"Card locked!" message appears.
The SD memory card's
and SDHC memory
card's write protect tab is
set to "Write protect".
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low.
Press the power button (Basic Guide
p. 11).
Confirm that the memory card slot/
battery cover is securely closed
(Basic Guide p. 7).
Insert a fully charged battery into the
camera (Basic Guide p. 7).
Use the AC Adapter Kit ACK-DC10
(sold separately) (p. 131).
Polish the terminals with a soft
cotton swab before charging or
using the battery (p. 127).
The camera's orientation
mechanism is operating. There is no
malfunction.
When recording to, erasing from or
formatting the memory card, slide
the write protect tab upward (p. 129).
Recharge the built-in battery
immediately (Basic Guide p. 9).
113